13 November 2019
Researchers Capture Moving Object with Ghost Imaging
By using information from blurry images to create clear reconstructions, new method could expand applications for ghost imaging
WASHINGTON — Researchers have developed a way to capture moving objects with the unconventional imaging method known as ghost imaging. The new method could make the imaging technique practical for new applications such as biomedical imaging, security checks and video compression and storage.
Ghost imaging comes with a host of advantages, one of which is that it allows one to form an image by illuminating the object with lower light levels than traditional imaging approaches. However, ghost imaging has been limited to stationary objects because it takes a long time to project the sequence of light patterns onto the object that is necessary to reconstruct an image. This causes images of a moving object to appear blurry.
In The Optical Society (OSA) journal Optics Letters, researchers from the National University of Defense Technology in China describe how they were able to combine information in the blurry images with details about the object’s location to create high quality images of moving objects with ghost imaging.
Caption: Researchers used ghost imaging to capture images of the translating and rotating object in the first row. They used information in the blurry images (middle row) to create the reconstructed images in the bottom row.
Credit: Wei-Tao Liu, National University of Defense Technology
“Our work shows that blurred images contain useful information,” said research team leader Wei-Tao Liu. “With further improvements, this approach could make ghost imaging useful for applications such as biomedical imaging of human beings. If used with x-rays, for example, it could help reduce the radiation dose needed for imaging.”
Creating a clear image
The ghost imaging technique forms an image by correlating a beam that interacts with the object and a reference beam that does not. Individually, the beams don’t carry any meaningful information about the object. The imaging technique works with visible light, x-rays and other parts of the electromagnetic spectrum and, when the structured light beams are generated computationally with spatial light modulators, can be performed with a low-cost single-pixel detector instead of a complex, expensive camera.
To apply ghost imaging to moving objects, the new method uses a small number of light patterns to capture the position and trajectory of the object. The researchers developed an algorithm to cross correlate this positional information with blurred images captured at different positions, allowing a clear image to be gradually formed.
“This approach relaxes the requirement for fast imaging, and because the algorithm is linear, it doesn’t require a large amount of computing power,” explained Liu. “The method can be performed with a typical ghost imaging system without any additional devices and allows the image to be reconstructed in a timely manner.”
Standard setup captures new information
The researchers demonstrated their new method using a typical ghost imaging system, in which a random light field generated by a rotating diffuser was divided into two beams. One beam was recorded by a CCD camera, while the other illuminated a moving object the researchers created using a digital micromirror device. The light coming from the moving object was collected by a single-pixel detector.
“We demonstrated that our method captured the trajectory of the image and formed a high-quality image,” said Liu. “With these same experimental conditions, traditional ghost imaging approaches would have lost most of the object information due to blurring from movement.”
The researchers are now working to improve the performance of the approach so that it would work for objects moving at higher speeds. They also want to further reduce the amount of light needed to further expand the technique’s applications.
Paper: S. Sun, J.-H. Gu, H.-Z. Lin, L. Jiang, W.-T. Liu, “Gradual ghost imaging of moving objects by tracking based on crosscorrelation,” Opt. Lett., 44, 22, 5594-5597 (2019).
About Optics Letters
Optics Letters offers rapid dissemination of new results in all areas of optical science with short, original, peer-reviewed communications. Optics Letters accepts papers that are noteworthy to a substantial part of the optics community. Published by The Optical Society and led by Editor-in-Chief Miguel Alonso, Institut Fresnel, École Centrale de Marseille and Aix-Marseille Université, France, University of Rochester, USA. Optics Letters is available online at OSA Publishing.
About The Optical Society
The Optical Society (OSA) is dedicated to promoting the generation, application, archiving, and dissemination of knowledge in optics and photonics worldwide. Founded in 1916, it is the leading organization for scientists, engineers, business professionals, students, and others interested in the science of light. OSA’s renowned publications, meetings, online resources, and in-person activities fuel discoveries, shape real-life applications and accelerate scientific, technical, and educational achievement.
Optica (formerly OSA) is dedicated to promoting the generation, application, archiving and dissemination of knowledge in optics and photonics worldwide. Founded in 1916, it is the leading organization for scientists, engineers, business professionals, students and others interested in the science of light. Optica’s renowned publications, meetings, online resources and in-person activities fuel discoveries, shape real-life applications and accelerate scientific, technical and educational achievement.