De-Multiplexing to the Max 640 Gbits/second



FOR IMMEDIATE RELEASE

Contact:
Lyndsay Meyer
The Optical Society
+1.202.416.1435
lmeyer@osa.org

Phil Schewe
American Institute of Physics
301.209.3092
pschewe@aip.org

De-Multiplexing to the Max: 640 Gbits/second

New speed record for reliable reading of optical data with a compact ultra-fast component may help improve circuit design

WASHINGTON, Feb. 2—Sliced light is how we communicate now. Millions of phone calls and cable television shows per second are dispatched through fibers in the form of digital zeros and ones formed by chopping laser pulses into bits. This slicing and dicing is generally done with an electro-optic modulator, a device for allowing an electric signal to switch a laser beam on and off at high speeds (the equivalent of putting your hand in front of a flashlight). Reading that fast data stream with a compact and reliable receiver is another matter. A new error-free speed-reading record using a compact ultra-fast component—640 Gbits/second (Gbps, or billion bits per second)—has now been established by a collaboration of scientists from Denmark and Australia, who report their results in the journal Optics Express, the Optical Society’s (OSA) open-access journal.

New technology and new ways of doing business require new approaches to old procedures.  Conventional readers of optical data depend on photo-detectors, electronic devices that can operate up to approximately 40 Gbps. This in itself represents a great feat of rapid reading, but it’s not good enough for the higher-rate data streams being designed now. The data receiving rate has to keep up.

Sometimes to speed up data transmission several signals are multiplexed: each, with its own stream of coded data, is sent down an optical fiber at the same time. In other words, 10 parallel streams of data could each be sent at a rate of 10 Gbps and then added up to an effective stream of 100 Gbps. At the receiving end the parallel signals have to be read out in a complementary de-multiplexing process. Reliable and fast multiplexing and de-multiplexing represent a major bottleneck in linking up the electronic and photonic worlds.

In 1998 researchers in Japan created a data stream as high as 640 Gbps and were able to read it back, but the read-out apparatus relied on long lengths of special optical fiber. This particular approach is somewhat unstable. The new de-multiplexing device demonstrated at the Technical University of Denmark, by contrast, can handle the high data rate, and can do so in a stable manner. Furthermore, instead of fibers 50 meters long, they accomplish their de-multiplexing of the data stream with a waveguide only 5 cm long, an innovation developed at the Centre for Ultrahigh Bandwidth Devices for Optical Systems, or CUDOS, in Australia. Another benefit of the new device with the compact size is the potential for integration with other components to create more advanced ultra-fast functional chips. The dynamics involved in the CUDOS device could even allow for still higher data rates approaching terabits/second (Tbps, or trillion bits per second).

One of the authors of the new report, Danish scientist Leif K. Oxenløwe, says that the record speeds of de-multiplexing represented by his tiny glass microchip is a boon to circuit designers and opens the door to faster network speeds. In the near future, the Danish and Australian researchers hope to achieve 1 Tbps Ethernet capability.

Paper: "Breakthrough switching speed with an all-optical chalcogenide glass chip: 640 Gbit/s Demultiplexing," Leif Oxenløwe et al, Optics Express, Vol. 17, Issue 4, Feb. 16, 2009.

Editor’s Note: Experts Available
Lead Author:
Leif K. Oxenløwe
Technical University of Denmark

Subject-Matter Source:
Namkyoo Park
Seoul National University, South Korea
Associate Editor, Optics Express

To set up interviews, please contact Lyndsay Meyer, 202.416.1435, lmeyer@osa.org.

About OSA
Uniting more than 70,000 professionals from 134 countries, the Optical Society (OSA) brings together the global optics community through its programs and initiatives. Since 1916 OSA has worked to advance the common interests of the field, providing educational resources to the scientists, engineers and business leaders who work in the field by promoting the science of light and the advanced technologies made possible by optics and photonics. OSA publications, events, technical groups and programs foster optics knowledge and scientific collaboration among all those with an interest in optics and photonics. For more information, visit www.osa.org.

###

Share:
Keyword
Topics

Guide Star Alliance Team Receives OSA’s 2017 Paul F. Forman Team Engineering Excellence Award

The Optical Society (OSA) is pleased to announce that Guide Star Alliance is the winner of the 2017 Paul F. Forman Team Engineering Excellence Award. Under contract of and in close collaboration with the European Southern Observatory (ESO), industrial partners, TOPTICA Photonics and MPB Communications (MPBC), joined together to develop a high-power CW tunable laser system called the SodiumStar. The team’s development is now considered the quasi-standard for existing and planned telescopes around the world. The Guide Star Alliance will receive the award on 18 September 2017, during Frontiers in Optics (FiO) + Laser Science (LS) in Washington DC, USA.

Added: 18 Aug 2017


New Terahertz Imaging Approach Could Speed Up Skin Cancer Detection

Researchers have developed a new terahertz imaging approach that, for the first time, can acquire micron-scale resolution images while retaining computational approaches designed to speed up image acquisition. This combination could allow terahertz imaging to be useful for detecting early-stage skin cancer without requiring a tissue biopsy from the patient.

Added: 17 Aug 2017


New Tool Aims to Make Surgery Safer by Helping Doctors See Nerves

During operations, it can be difficult for surgeons to avoid severing crucial nerves because they look so much like other tissue. A new noninvasive approach that uses polarized light to make nerves stand out from other tissue could help surgeons avoid accidentally injuring nerves or assist them in identifying nerves in need of repair.

Added: 16 Aug 2017


Relativistic Self-Focusing Gives Mid-IR Driven Electrons a Boost

Conventional particle accelerators can range from large room-sized devices to facilities multiple kilometers across. One of the ways that scientists have looked to reduce the size and expense of future accelerators is by developing laser –driven plasma acceleration. Such accelerators, however, are growing in size and complexity in order to maintain relevance for one of their applications—high energy physics. However, there are many applications that can use a lower energy and higher repetition rate accelerated beam. For the first time, scientists have observed the production of relativistic electrons driven by low-energy, ultrashort mid-infrared laser pulses.

Added: 15 Aug 2017


OSA Laser Congress Plenary to Highlight Ultrafast Laser Systems and Black Hole Detection

The OSA Laser Congress 2017 will feature the latest advancements in solid state laser developments and related technologies for use in free space laser communication, laser-based sensing and numerous industrial applications.

Added: 10 Aug 2017


New Optical Method Pinpoints Weak Spots in Jet Engine Thermal Coatings

Researchers have demonstrated, for the first time, that an optical analysis method can reveal weak areas in ceramic thermal barrier coatings that protect jet engine turbines from high temperatures and wear. The technique could be used to predict how long coatings would last on an airplane and might eventually lead to new thermal barrier coatings, making engines more efficient and cutting both the cost and pollution of air travel.

Added: 09 Aug 2017


The Optical Society Congratulates Ed White on Selection as Chair of the NPI

The Optical Society (OSA) commends the selection of Edward White, associate vice president of test, assembly and packaging and corporate outreach for AIM Photonics, as the next National Photonics Initiative (NPI) Steering Committee Chair. White will succeed Alan Willner, the Steven and Kathryn Sample Chair in Engineering University of Southern California and 2016 president of OSA. The National Photonics Initiative is an alliance of top scientific societies uniting industry and academia to raise awareness of photonics, and its impact on society.

Added: 04 Aug 2017


See the World Differently at FIO + LS 2017

Whether you are in an autonomous vehicle looking to avoid collisions with nearby objects, or sitting on Earth and trying to detect collisions of black holes in the furthest galaxies, the Frontiers in Optics + Laser Science APS/DLS (FIO + LS) plenary presentations will detail recent achievements in gravitational wave science and today’s LiDAR applications.

Added: 03 Aug 2017


The Optical Society Foundation Concludes Successful 2017 Innovation School

The Optical Society Foundation (OSAF) hosted early-career professionals during its first Innovation School from 23-27 July at OSA headquarters in Washington DC. The four-day program focused on honing ‘intrapreneurial’ skills through a series of interactive ‘ideation and customer validation’ exercises. In addition, the hands-on program was accompanied by presentations led by CEO’s, entrepreneurs and innovation leaders in the optics and photonics industry.

Added: 01 Aug 2017


The Optical Society Creates Optical Design Innovator Award

The Optical Society (OSA) is pleased to announce the creation of the Kevin P. Thompson Optical Design Innovator Award recognizing significant contributions to lens design, optical engineering or metrology by an individual at an early career stage. The inaugural award will be given in 2018.

Added: 26 Jul 2017


Sophisticated Medical Imaging Technique Proves Useful for Automotive Industry

Many of today’s cars are coated with paint that exhibits a metallic or glittery shine. The exact sparkle and color you see is determined by the distribution and characteristics of tiny metal flakes used in the paint. A new approach based on the medical imaging technique optical coherence tomography (OCT) provides the car industry with a practical way to automatically analyze these metal flakes, which until now have been difficult to image, in order to improve the efficiency of the automotive finishing process.

Added: 25 Jul 2017


Optics Leaders Announced as Visionary Speakers for 2017 FIO + LS Meeting

The Frontiers in Optics + Laser Science APS/DLS (FIO + LS) conference and exhibition provides a venue for leaders in the optics and photonics community to discuss the latest advances in the field. In 2017, the FIO + LS meeting has been thoughtfully redesigned and revised, offering attendees the best of past meetings while adding innovative elements to this year’s meeting. A new speaker category of visionary speakers have been added and will deliver presentations around the four conference themes

Added: 20 Jul 2017