Improved Spectrometer Based on Nonlinear Optics



MEDIA ADVISORY

Contact:
Lyndsay Meyer
The Optical Society
+1.202.416.1435
lmeyer@osa.org

Improved Spectrometer Based on Nonlinear Optics

New tool allows for higher sensitivity at reduced complexity and cost

Scientists at Stanford University and Japan’s National Institute of Informatics have created a new highly sensitive infrared spectrometer. The device converts light from the infrared part of the spectrum to the visible part, where the availability of superior optical detectors results in strongly improved sensing capabilities. The research will appear in the Nov. 24 issue of Optics Express, the Optical Society’s open access journal. The new spectrometer is 100 times more sensitive than current commercial optical spectrum analyzers used in industrial applications such as optical communication, semiconductor microelectronics and forensic analysis.

Summary

Current spectrometers being used on the market today cover a wide spectral range, allow for moderately fast wavelength sweeps, have a good spectral resolution and don’t require cryogenic cooling. However, the sensitivity of these instruments is limited, making them unsuitable for capturing single-photon-level spectra at telecommunication wavelengths. Cryogenic cooling can increase the sensitivity of these devices, yet reduces the usefulness for industrial applications. One possible solution is to up-convert near-infrared to visible light in a nonlinear medium. The up-converted photons can then be detected using a single-photon detector for visible light. The authors use a single-photon counting module, which results in 100 times better sensitivity. They implemented the frequency conversion via sum-frequency generation in a periodically poled lithium niobate waveguide, which can be thought of as combining two low-energy photons to get one high-energy photon.

Key Findings

  • The up-conversion based spectrometer’s sensitivity is 100 times higher compared to current commercial optical spectrum analyzers.
  • Cryogenic cooling is not required for increased sensitivity, making the device practical for a variety of industrial applications.
  • The cost and system complexity of the spectrometer is reduced because it only uses one single-photon detector instead of an array of detectors.

Paper

“Waveguide-Based Single-Pixel Up-Conversion Infrared Spectrometer,” Optics Express, Vol. 16, Issue 24.

For a copy of the paper, please e-mail lmeyer@osa.org.

Abstract

A periodically poled lithium niobate (PPLN) waveguide-based single-pixel up-conversion infrared spectrometer was demonstrated. Sum-frequency generation between a 1.5-μm-band scanning pump laser and a 1.3-μm-band signal generated visible radiation which was detected by a silicon single-photon detector. The up-conversion spectrometer’s sensitivity was two-orders-of-magnitudes higher than that of a commercial optical spectrum analyzer.

Experts Available

Lead Author:
Qiang Zhang
Ginzton Laboratory, Stanford University, USA

Industry Source:
Martti Kauranen
Professor of Physics, Tampere University of Technology, Finland
Associate Editor, Optics Express

To set up interviews, please contact Lyndsay Meyer, 202.416.1435 or lmeyer@osa.org.

About OSA
Uniting more than 70,000 professionals from 134 countries, the Optical Society (OSA) brings together the global optics community through its programs and initiatives. Since 1916 OSA has worked to advance the common interests of the field, providing educational resources to the scientists, engineers and business leaders who work in the field by promoting the science of light and the advanced technologies made possible by optics and photonics. OSA publications, events, technical groups and programs foster optics knowledge and scientific collaboration among all those with an interest in optics and photonics. For more information, visit www.osa.org.

Share:
Keyword
Topics

Optics Leaders Announced as Visionary Speakers for 2017 FIO + LS Meeting

The Frontiers in Optics + Laser Science APS/DLS (FIO + LS) conference and exhibition provides a venue for leaders in the optics and photonics community to discuss the latest advances in the field. In 2017, the FIO + LS meeting has been thoughtfully redesigned and revised, offering attendees the best of past meetings while adding innovative elements to this year’s meeting. A new speaker category of visionary speakers have been added and will deliver presentations around the four conference themes

Added: 20 Jul 2017


Researchers Look Inside Dangerous Blood Clots with Optical Clearing Technique

A new technique that makes blood clots optically clear is allowing researchers to use powerful optical microscopy techniques to study the 3D structure of dangerous clots for the first time. Although blood clots stop bleeding after injury, clots that block blood flow can cause strokes and heart attacks.

Added: 17 Jul 2017


New Imaging Technique Fast Enough to Watch Molecular Dynamics Involved in Neurodegenerative Diseases

Researchers have developed a fast and practical molecular-scale imaging technique that could let scientists view never-before-seen dynamics of biological processes involved in neurodegenerative diseases such as Alzheimer’s disease and multiple sclerosis.

Added: 13 Jul 2017


OSA Members Host Photonics Facility Tour for Congressman Charlie Dent

During the recent District Work Week, Representative Charlie Dent (R - Pa) toured the Center for Photonics and Nanoelectronics (CPN) and the Smith Family Laboratory for Optical Technologies, Lehigh University, PA. The tour was arranged by OSA members Nelson Tansu, the Daniel E. ’39 and Patricia M. Smith Endowed Chair Professor and Director of the CPN and Sean Anderson, a Photonics Engineer at Cisco.

Added: 12 Jul 2017


OSA’s Optics & Photonics News Wins 2017 APEX Award

OSA Publishing is pleased to announce that the staff of Optics & Photonics News (OPN), The Optical Society’s news and member magazine, has received a 2017 APEX Grand Award for publication excellence. The award honors a series of four commemorative booklets that the OPN team developed to highlight 100 years of The Optical Society.

Added: 11 Jul 2017


The Optical Society Announces 2017 OSA Optical Design & ​Fabrication Congress Highlights

Optical design and fabrication play an ever-increasing role in our modern society as more applications for optics are developed, especially in the areas of imaging, sensing and illumination systems. Advances in optical design and fabrication have led to the ability to utilize modern design tools to reduce cost, augment manufacturability, and enhance system performance in a wide variety applications.

Added: 05 Jul 2017


LASER World of Photonics 2017 Closes in Munich with a Record Number of Exhibitors and Attendees

WASHINGTON — The LASER World of Photonics Congress, a conference and exhibition co-sponsored by The Optical Society (OSA), attracted a record number of exhibitors and attendees over a four day period in Munich, Germany. The meeting was held in conjunction with CLEO/Europe – EQEC 2017 and the European Conferences on Biomedical Optics (ECBO 2017) from 25-29, June 2017.

Added: 03 Jul 2017


OSA Imaging & Applied Optics Congress Focuses on Breakthrough Imaging Innovations

The 2017 OSA Imaging and Applied Optics Congress (AIO/IS) concluded in San Francisco, California with nearly 350 attendees and more than 250 presentations from covering the diverse optical imaging industry. Research highlights included novel imaging optical imaging industry, innovative and collaborative applications and the future of imaging, as well as topical symposia highlighting advancements in 3D Image Acquisition and Display: Technology, Perception and Applications, Applied Industrial Optics, Computational Optical Sensing and Imaging, Imaging Systems and Applications, Mathematics in Imaging, Propagation Through and Characterization of Atmospheric and Oceanic Phenomena.

Added: 30 Jun 2017


Seeing the Forest Through the Trees with a New LiDAR System

Shortly after lasers were first developed in the 1960s, LiDAR – whose name originated as a combination of “light” and “radar” – capitalized on the newly unique precision they offered for measuring both time and distance. LiDAR quickly became the standard method for (3-D) land surveys and is now used in a multitude of sensing applications, such as self-driving cars.

Added: 27 Jun 2017


Moisture-Responsive ‘Robots’ Crawl with No External Power Source

Using an off-the-shelf camera flash, researchers turned an ordinary sheet of graphene oxide into a material that bends when exposed to moisture. They then used this material to make a spider-like crawler and claw robot that move in response to changing humidity without the need for any external power.

Added: 26 Jun 2017


OSA to Host an Incubator Meeting on Materials for Optomechanical Actuation

Incubator meeting to provide a collaborative forum for problem-solving optomechanical materials challenges.

Added: 25 Jun 2017


New Screen Coating Makes Reading in Sunlight a Lot Easier. The Secret? Moth Eyes.

Screens on even the newest phones and tablets can be hard to read outside in bright sunlight. Inspired by the nanostructures found on moth eyes, researchers have developed a new antireflection film that could keep people from having to run to the shade to look at their mobile devices.

Added: 22 Jun 2017