Engineering Algae to Make Fuel Instead of Sugar



FOR IMMEDIATE RELEASE

Contact:
Lyndsay Meyer
The Optical Society
+1.202.416.1435
lmeyer@osa.org

Jason Socrates Bardi
American Institute of Physics
301.209.3091
jbardi@aip.org

Engineering Algae to Make Fuel Instead of Sugar

Optics Express Research Describes How Tiny Organism Can Make Biofuel

WASHINGTON, Dec. 17 - In pursuing cleaner energy there is such a thing as being too green.  Unicellular microalgae, for instance, can be considered too green. In a paper in a special energy issue of Optics Express, the Optical Society’s (OSA) open-access journal, scientists at the University of California, Berkeley describe a method for using microalgae for making biofuel. The researchers explain a way to genetically modify the tiny organisms, so as to minimize the number of chlorophyll molecules needed to harvest light without compromising the photosynthesis process in the cells. With this modification, instead of making more sugar molecules, the microalgae could be producing hydrogen or hydrocarbons.

Berkeley researchers have identified the genetic instructions in the algae genome responsible for deploying approximately 600 chlorophyll molecules in the cell’s light-gathering antennae.  They believe that the algae can get along with as few as 130 molecules. Basically the scientists want to divert the normal function of photosynthesis from generating biomass to making products such as lipids, hydrocarbons, and hydrogen.

Tasios Melis, one of the paper's co-authors, argues that the algae’s chlorophyll antennae help the organisms compete for sunlight absorption and survive in the wild, where sunlight is often limited, but is detrimental to the engineering-driven effort of using algae to convert sunlight into biofuel.

Melis uses the phrase “cellular optics” to describe this general effort to maximize the efficiency of the solar-to-product conversion process.  Besides getting the algae to convert more sunlight to fuel, another issue that needs to be addressed is how to configure bio-culture tanks in such a way that sunlight can penetrate the outer layer of algae so that lower-down layers can participate in the photo-conversion too.

Microalgae are ideal because of their high rate of photosynthesis; they are perhaps ten times more efficient in this than the land plants—such as sugarcane, corn, and switchgrass—often discussed as possible biofuel stocks.

How soon can algae play a role?  According to Melis, “Progress is substantial to date, but not enough to make the process commercially competitive with fossil fuels.  Further improvement in the performance of photosynthesis under mass culture conditions, and in the yield of “biofuels” by the microalgae are needed before a cost parity with traditional fuels can be achieved.”

Paper: "Optical properties of microalgae for enhanced biofuels production," Mautusi Mitra and Anastasios Melis, Optics Express, Vol. 16, Issue 6, December 22, 2008, Focus Issue on Solar Energy edited by Alan Kost, University of Arizona.

Editor’s Note: Additional press releases on papers in the Optics Express Focus Issue on Solar Energy, are available:

The Green (and Blue, Red, and White) Lights of the Future

Enhancing Solar Cells with Nanoparticles

About OSA
Uniting more than 70,000 professionals from 134 countries, the Optical Society (OSA) brings together the global optics community through its programs and initiatives. Since 1916 OSA has worked to advance the common interests of the field, providing educational resources to the scientists, engineers and business leaders who work in the field by promoting the science of light and the advanced technologies made possible by optics and photonics. OSA publications, events, technical groups and programs foster optics knowledge and scientific collaboration among all those with an interest in optics and photonics. For more information, visit www.osa.org.

Share:
Keyword
Topics

Science and Applications Intersect at the 2017 FIO + LS

The 2017 Frontiers in Optics + Laser Science (FIO + LS) conference and exhibition concluded today featuring the latest in optics and photonics research and technology. With over 1,200 attendees, this year’s meeting has been redesigned to provide attendees with innovative elements, such as the new Science and Industry Showcase and Visionary Speakers, and new presentation formats to spur thoughtful conversation around a richer array of results.

Added: 21 Sep 2017


New Technique Accurately Digitizes Transparent Objects

A new imaging technique makes it possible to precisely digitize clear objects and their surroundings, an achievement that has eluded current state-of-the-art 3D rendering methods. The ability to create detailed, 3D digital versions of real-world objects and scenes can be useful for movie production, creating virtual reality experiences, improving design or quality assurance in the production of clear products and even for preserving rare or culturally significant objects.

Added: 19 Sep 2017


The Optical Society Elects Stephen D. Fantone as 2018 Vice President

The Optical Society (OSA) is pleased to announce that its members have elected Stephen D. Fantone, president and founder of Optikos Corporation, United States, as its 2018 vice president. Three directors-at-large were also chosen during this year's election: Roel Baets, Ghent University, Belgium; Gisele Bennett, Georgia Institute of Technology, USA; and Ekaterina Golovchenko, IPG Photonics, USA. The announcement was made today during The Optical Society’s Annual Business Meeting at the 2017 Frontiers in Optics + Laser Science (FIO + LS) conference in Washington, DC, USA.

Added: 19 Sep 2017


OSA Publishing Recognizes and Congratulates Outstanding Reviewers

In support of Peer Review Week 2017, an industry-wide celebration of the essential role that peer review plays in maintaining scientific quality, OSA recognizes and thanks its 2017 class of Outstanding Reviewers. This distinguished group of 25 members of the optics and photonics community was selected based on their commitment to providing a high level of technical expertise and constructive criticism in the peer-review process. Established in 2012, the OSA Outstanding Reviewers recognition is given annually to commend the top reviewers for their exceptional peer-review efforts over the past year.

Added: 14 Sep 2017


New Software Turns Mobile-Phone Accessory into Breathing Monitor

Researchers have developed new software that makes it possible to use low-cost, thermal cameras attached to mobile phones to track how fast a person is breathing. This type of mobile thermal imaging could be used for monitoring breathing problems in elderly people living alone, people suspected of having sleep apnea or babies at risk for sudden infant death syndrome (SIDS).

Added: 13 Sep 2017


The Optical Society Hosts Special Networking and Member Events During FIO + LS 2017

The Optical Society (OSA), the leading professional association in optics and photonics, will host a variety of special events during the 2017 Frontiers in Optics + Laser Science (FIO + LS) conference and exhibit from 17 - 22 September in Washington, DC. The activities include unique networking and professional development programs, a reception with OSA journal editors and special opportunities for OSA members and their families.

Added: 12 Sep 2017


Core Solutions Reach Optimally Extreme Light Pulses

As scientist probe nature ever more precisely with laser pulses, now aiming for the zeptosecond regime – a trillionth of a billionth of a second and the fastest scale of time measured – optimizing each parameter of those pulses can offer more finely tuned measurements of as-yet unknown dynamic properties. The laser wavelength, duration and energy of each pulse, and rate at which pulses are produced are all key factors in observing dynamics such as the real-time electron motions of single molecules together with the motion of consistituent atoms.

Added: 11 Sep 2017


The Optics Driving Today’s Auto Industry

In the next ten years, the auto industry will undergo a profound transformation: the cars it builds, the power moving them forward and the consumers who buy them will look significantly different. Optical technologies, in many ways, will enable these changes. Featuring experts from all aspects of the automotive industry, this panel discussion will highlight advances the technology behind (and above) the dashboard and how it will impact how we drive in the future.

Added: 08 Sep 2017


Light-Based Method Improves Practicality and Quality of Remote Wind Measurements

Researchers have developed a new remote sensing instrument based on light detection and ranging (LIDAR) that could offer a simple and robust way to accurately measure wind speed. The detailed, real-time wind measurements could help scientists to better understand how hurricanes form and provide information that meteorologists can use to pinpoint landfall earlier, giving people more time to prepare and evacuate.

Added: 06 Sep 2017


The Optical Society Announces 2017 Treasurer’s Award Recipient

The Optical Society (OSA), the leading global professional association in optics and photonics, announced today that M. Scott Dineen, senior director of production and technology for OSA has been awarded the 2017 Treasurer’s Award. Dineen has been recognized for excellence in publishing technology and the development of new tools essential for maintaining and enhancing OSA’s publishing leadership

Added: 06 Sep 2017


Rush Holt to Deliver Science Policy talk during 2017 Frontiers in Optics + Laser Sciences Meeting

At a time when there are widespread concerns about the place of science in our society and government, what role should scientists have with policymakers? What can be done to help avoid policies that devalue science and discontinue the much needed investment in research and development? Rush Holt, CEO of the American Association for the Advancement of Science (AAAS) will address these issues and more during a special presentation during the Frontiers in Optics + Laser Science (FIO + LS) conference and exhibition in Washington, DC.

Added: 30 Aug 2017


Clamping Down on Causality by Probing Laser Cavities

Since the realization of the first laser cavity countless questions have been asked for which laser light has provided the answer. Numerous questions have also been posed in an effort to improve on our abilities to produce lasers with various performance specifications and wavelengths. A question that was not asked until recently is – what happens if you shine a laser beam through another laser cavity? It may not seem a practical question to ask experimentally, but after studying how externally incident light interacts with an active laser cavity in quantitative detail, the answer turns out to offer devices with new, seemingly paradoxical optical capabilities.

Added: 29 Aug 2017